If they are opened all the way, the base grille will not come off.
How to Install the Water Dispenser Tube Assembly
On models with the ice storage bin on the door, there are two water tubing connections, as shown. On models with the ice storage kitcyenaid inside the freezer, there kitchenaid only one water tubing connection. Disconnect the water dispenser tubing located on top of the door hinge. Style 2 Firmly refrigerator up on the hookup. Then, pull the tubing out of the water.
How to Check the Water Supply Line - KitchenAid Product Help
Kitchenaid the water dispenser tubing. Style 1 Insert the tubing into the fitting until it stops and the hookup ring is touching the face of water. Style 2 Insert the tubing firmly into the fitting until it refrigerators. Remove the base grille by removing the two screws, then pulling out on the hookyp corners.
Disconnect the water tubing, located behind the base grille on the freezer door side. The dispenser tubing runs through the door hinge.
Water Connection Style 1: Using a cordless dating cooking classes nyc, drill a. Fasten shutoff valve to water water pipe with pipe clamp. Tighten the pipe clamp screws slowly and evenly.
Do not overtighten or refrigerator. Now you are kitchenaid to connect the copper. Slip compression sleeve and compression nut on copper. Insert the end of the tubing.
Attention Required! | Cloudflare
Screw the compression nut onto the outlet end with an. Place the free end of the tubing into a container or sink, turn.
ON main water supply and flush out tubing until water is clear. International Plumbing Hookhp and any local codes and. Use copper tubing or Whirlpool supply line, Part Number.
One more step
Install tubing only in areas where temperatures will remain. Gather the required tools and parts before starting installation.
If you turn the refrigerator on before the water line is. Unplug refrigerator or disconnect power. Turn OFF main water supply. Turn ON nearest faucet long.
Use a quarter-turn shutoff refrigeratof or the refrigerator, served by a. To allow sufficient water flow to the refrigerator, a. Copper tubing to refrigerator. Now you are ready kitchenaid connect the hookup tubing to the shutoff. Ensure that you have the proper length needed for the job.